
The introduction of ClearMask AR™ Film is the result of well over a decade of experience in the paint protection film industry. Our extensive experience designing and selling paint protection film kits for do-it-yourself installation has highlighted the need for a film that was easier to install than the 'industry standard' films. ClearMask is now proud to announce ClearMask AR™ film, which combines longevity and a great 'on-car' look with an ease of installation unmatched in the paint protection film industry - at a price more affordable than many inferior products !
ClearMask AR™ film features Air Release™ technology. The films adhesive system provides proprietary air egress channels allowing much easier repositioning of the film on a painted surface during installation.
As firm pressure is applied with a squeegee during the installation process, air is forced out of the adhesive layer and the film bonds smoothly and cleanly to the painted surface. This characteristic of the ClearMask AR Film adhesive results in easier installation and far fewer air or water bubbles to correct than would be the case with any other film.
These installation characteristics make ClearMask AR™ film the most 'user-friendly' film we sell. Our leading-edge kit designs, combined with the exceptional installed look and unmatched ease-of-installation of this film make our new ClearMask AR™ kits the best auto paint protection value in the industry.
Property |
Method |
Units |
Value |
| Tensile Strength @ Break |
PSTC - 133 |
lb/in (N/100 mm) |
54 lb/in |
| Elongation % @ Break |
|
% |
760 |
| Minimum Continuous Temperature |
|
F ( C) |
-10 F (-23C)c |
| Maximum Continuous Temperature |
|
F ( C) |
212 F (100C) |
| Minimum Intermittent Temperature |
|
F ( C) |
240 F (116C) |
| Peel Adhesion @ 70 F (21 C) to: |
PSTC - 133 |
oz/in (N/100 mm) |
60 oz/in |
Dimensions |
|
|
|
| Approximate Applied Thickness: |
0.006 inch (0.15 mm) Film
0.002 inch (0.05 mm) Adhesive
0.008 inch (0.20 mm) = Total thickness |
|